Wood stripper inside
Any paint stripper is going to take it back past the paint, i would recommend a manual approach using a filler knife, paint scraper or scotch pad to gently remove the paint from the surface of the wood. If you start too soon, the remover may not have time to soften the coating or penetrate through all layers. For stubborn areas you may be required to re apply. The Peelaway 1 is more suited to old paints and varnishes and a test area will show if it will work on your floors and how long you need to leave it on for. Both said to start by trying to scrub with water first, or even soapy water.
2. Apply the remover
Get Expert Tips: 1.800.398.3892
I need to take as much of the paint off as possible. Most are applied in several layers, and will require 30 seconds to 5 minutes per layer to dissolve. Want To stain them- possibly Danish oil then upholster But need the wood to look uniform it colour. It is advisable to do a test area first as this will help you to determine firstly if this is the right product and also how long you need to leave it on for. If it is just chalk paint on the tables and no wax then it is likely to wash off with warm water.
Jasco | Basics of Stripping Coatings
It is a paint and varnish stripper and could help with your project. Have a look at those products and if you have any further questions please do let me know. Work on small surface areas, up to 9 sq. If you use paint strippers frequently, it is particularly important that you follow these steps:. Solvent paint strippers penetrate the layers of paint and break the bond between the paint and the object by swelling the paint. Would a solvent paint stripper do the job? For further advice please do not hesitate to get in touch.
It is a poultice that you leave on the surface for 24 — 48 hours, covered with a piece of paper. Apply remover to a small area up to 9 sq. Always do a test area first. Take the pad, wet with stripper, and scrub the wood, always working with the grain. Also if you get chance to send some photos of the sewing table, I would love to see, as a collector of a few vintage sewing machines, love to see what people do with the tables. The cart is oak and has been painted gray. Much better than the bad old days when your only choice was pure caustic soda, nasty stuff!